This story started a few nights ago. I had been monkeying around with the AR102S, both at its native aperture and stopped down, and I decided to see how it compared to the C80ED. In particular, I wanted to compare the rich-field views of both scopes (such as they are here – I was observing from the driveway after all), so I was looking at the belt and sword of Orion. The results of that comparo were not very surprising – with it’s wider aperture and shorter focal length, the AR102S goes significantly wider and brighter, but the longer focal ratio and low-dispersion glass of the C80ED produce a better-corrected image.
What was not only surprising, but actively alarming, was that at low power I was getting ugly star images in the C80ED. Even in the center of the field, stars were not focusing down to nice little round points, but to crosses and shapes like flying geese. I wondered if my diagonal might have gotten banged up, so I swapped diagonals. The problem persisted. The scope will not reach focus without a diagonal or extension tube, and I don’t have an extension tube, so I couldn’t try straight-through viewing. Still, it was exceptionally unlikely that both of my good diagonals got horked in the same way.
I didn’t know what to make of that. I figured maybe the scope had gotten out of collimation somehow, and I was pondering whether to mess with it. It’s always been optically excellent and mechanically solid (overbuilt, in fact), and I was loathe to take it apart (as opposed to the TravelScope 70 and SkyScanner 100, both of which were crying out for disassembly).
Then a few days later I ran across this thread on CN, in which a guy was having the same problem I had. It sounded like it was more likely astigmatism (aka the Stig) in the eyes than in the telescope. Apparently it’s worse at low powers where the exit pupil is large, which makes sense – astigmatism is caused by having corneas that are out of round (football-shaped rather than basket-ball shaped), but as the exit pupils get smaller, the less of the cornea is involved in vision, and the more likely it is that the ‘active’ portion will approximate a radially even curvature.
One commenter recommended making a little diaphragm between thumb and forefinger to stop down the exit pupil. I tried that, but it was awfully difficult to hold my finger and my eye all steady and in alignment. Then I had the idea of using a collimation cap from one of my reflectors. That stopped down the exit pupil to a 1mm circle, which made the image d-i-m, but the star images cleaned right up. Then I took away the collimation cap and tried the view with and without glasses, and the glasses also cleaned up the star images.
It wasn’t the scope, it was me. I have astigmatism, and it’s bad enough that stars look ugly at low power unless I wear glasses.
On one hand, that’s a big relief, because the C80ED scope has always been a rock-solid performer. Along with the Apex 127, it’s my reference standard for good optics. I was feeling a bit queasy at the thought that it might have gotten out of whack.
On the other hand, I now need to prioritize eye relief in my eyepiece collection. I have a bunch that are too tight to show the whole field when I’m wearing glasses. So I have some decisions to make.
That was the first major discovery of the night.
The second was that the AR102S can take 2″ eyepieces with the most minor tinkering. The 2″-to-1.25″ adapter at the top of the AR102S focuser drawtube screws right off. I had been worried that it might be permanently affixed, but when I tried turning it, it spun with remarkable ease. Once I had it off, I dropped in the 32mm Astro-Tech Titan, which is my only 2″ eyepiece, and the views were pretty darned good. Way wider than with any of my 1.25″ eyepieces, and pretty clean as well, although I need to a little more head-to-head testing on that score. Possibly the star images looked good because they were so small at only 14x.
In any case, the 32mm Titan gives a significant boost in true field, from 3.6 degrees in the 32mm Plossl and 24mm ES68, to a whopping 4.88 degrees.
I don’t think there would be any advantage in going wider, at least in the AR102S. Astronomics seems to be out of Titans, but the equivalent 70-degree EPs are available through Bresser and Agena. The next step up would be a 35mm or 38mm, giving 13x and 12x, but those would push the exit pupil to 7.7mm and 8.5mm, and that’s just wasted light. At least in the AR102S – in the C80ED, longer 70-degree eyepieces would yield the following:
Focal length / magnification / exit pupil / true field
- 35mm / 17.1x / 4.7mm / 4.1 degrees
- 38mm / 15.8x / 5.1mm / 4.4 degrees
Either of those would be a good step up from the 3.7-degree max field that the 32mm Titan gives in the C80ED, without pushing the exit pupil uselessly wide.
Anyway, I’m just noodling now. The big news is that the C80ED is fine, I need to prioritize long eye relief in future EP purchases (and maybe thin the herd a bit?) so I can observe with glasses on, and the AR102S can take 2″ EPs after all.